Load data for .30 PICRA + .308 | 200gr | Barnes X S

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 200gr \| Barnes X S
Manufacturer SKU:	30845
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.475" \| 37.5mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.594" \| 15.1mm
Shank Seated Depth:	0.594" \| 15.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B640_C311
Last updated:	2025-01-01

Load data for 44 loads in caliber .30 PICRA with .308 | 200gr | Barnes X S bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	34969	86%	**1	100%
Accurate 4100	<<locked>>	73%	34882	86%	**60	92%
[Accurate No. 11 FS]*	<<locked>>	83%	34969	86%	**73	85%
Accurate No. 9	<<locked>>	63%	35186	87%	**50	97%
Accurate TCM	<<locked>>	63%	36071	89%	**53	98%
Alliant 2400	<<locked>>	69%	33982	84%	**50	95%
Alliant BLUE DOT	<<locked>>	71%	33649	83%	**20	99%
[Hodgdon H110]*	<<locked>>	78%	34650	85%	**83	89%
Hodgdon LilGun	<<locked>>	80%	35070	86%	**32	96%
Hodgdon TrailBoss	<<locked>>	91%	24308	60%	**6	100%
Maxam CSB 1	<<locked>>	65%	35998	89%	**9	100%
Ramshot Enforcer	<<locked>>	72%	36347	89%	**83	96%
ReloadSwiss RS 14	<<locked>>	90%	23090	57%	**2	100%
ReloadSwiss RS 30	<<locked>>	96%	35404	87%	**15	93%
SNPE Vectan BA6 1/2	<<locked>>	95%	33475	82%	**53	97%
SNPE Vectan BA7 1/2	<<locked>>	68%	36114	89%	**5	100%
[Somchem S265]*	<<locked>>	87%	36463	90%	**53	88%
Vihtavuori 3N38	<<locked>>	68%	33895	83%	**7	100%
Vihtavuori N105	<<locked>>	70%	33373	82%	**10	100%
Vihtavuori N110	<<locked>>	88%	34621	85%	**83	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	35128	86%	**4	100%
[Winchester 296]*	<<locked>>	78%	34737	86%	**02	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26281	65%	**3	100%
[Accurate 4100]*	<<locked>>	61%	24120	59%	**2	86%
[Accurate No. 11 FS]*	<<locked>>	73%	26629	66%	**8	80%
Accurate No. 9	<<locked>>	60%	32750	81%	**20	96%
Accurate TCM	<<locked>>	61%	33315	82%	**20	97%
Alliant 2400	<<locked>>	61%	27064	67%	**1	91%
Alliant BLUE DOT	<<locked>>	61%	26252	65%	**9	97%
[Hodgdon H110]*	<<locked>>	61%	21857	54%	**9	81%
[Hodgdon LilGun]*	<<locked>>	60%	19812	49%	**2	86%
Hodgdon TrailBoss	<<locked>>	84%	21582	53%	**3	100%
Maxam CSB 1	<<locked>>	61%	32401	80%	**7	100%
Ramshot Enforcer	<<locked>>	61%	27035	67%	**5	92%
ReloadSwiss RS 14	<<locked>>	82%	20769	51%	**3	100%
[ReloadSwiss RS 30]*	<<locked>>	73%	20291	50%	**3	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	15461	38%	**1	85%
SNPE Vectan BA7 1/2	<<locked>>	61%	30240	74%	**6	100%
[Somchem S265]*	<<locked>>	70%	24163	60%	**9	81%
Vihtavuori 3N38	<<locked>>	61%	28819	71%	**8	100%
Vihtavuori N105	<<locked>>	61%	25469	63%	**5	100%
[Vihtavuori N110]*	<<locked>>	60%	17695	44%	**0	84%
Vihtavuori N32C Tin Star	<<locked>>	62%	25860	64%	**6	100%
[Winchester 296]*	<<locked>>	68%	26498	65%	**8	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data